10 Printer Problems

 

Have you ever been in a position of emergency, rush, or being chased by deadlines having to print documents or pictures with a printer, suddenly the printer does not run normally or the print results are not as desired? Even though the printer has experienced such problems. Indeed, sometimes these problems arise at inappropriate times, making us feel irritated. Here are 10 printer problems that are often experienced by each user:

1.PAPER JAM

Paper jam or can be called paper jam is a problem that can occur in inkjet printers or laser jets. Simply remove the paper from inside the printer, including the torn pieces if any. The method can be done manually from behind the printer, directly open the printer lid, and gently pull the paper, there is also a laser printer simply

Turn off the printer and turn it back on. Reading the user guide on the printer will be more helpful. Because the completion for each printer is not the same. To prevent this, use good quality paper, avoid paper that is not suitable for use, and place the paper according to size.

2.LOST CONNECTION

This problem is commonly encountered that the printer cannot execute the printing print. The solution is to check all connected cables, make sure the cables are connected correctly, then check the control panel on the printing menu on the computer and make sure the printer to be used has been selected as the default printer that will print. If you are using a wireless system with a server connection, make sure the settings are correct. Check the pending print command, if there is a cancel command and repeat it again.

3.FADED PRINT

Faded prints or faded or faded prints usually occur due to improper print settings. Make sure not to set it on Ecomode or draft settings or anything like that. However, it can also be caused because the toner on the toner cartridge wants to run out or the ink on the ink cartridge runs out.

4.BROKEN PRINTOUT

This can be caused by two kinds that usually occur in inkjet printers. The first is that the tina printer has started to run out. The second is because the ink on the cartridge head dries. Even worse, the printer cannot remove ink at all. Do repeated cleaning, if it still happens, please take it to the service center so that it is easy to get a solution.

5.GHOSTING

Ghosting or shaded prints sometimes occur on the printer that you use. This can happen because the age of the drum unit has begun to decrease, the cartridge that has asked for a replacement, or in certain cases due to poor electricity, or the printer's power supply which is in poor condition.

6.INK SMEAR

Almost the same as ghosting, ink smear or there is an ink stain on the printout means that there is one drum unit on a laser printer, it is usually a fuser. However, inkjet printers can come from ink spills inside the printer. Try printing the first 15-20 pages to see whether the stain will disappear on its own or not.

7.PRINTER INK FREEZES

This usually happens with inkjet printers, if for a long period the printer is not used, it is very likely that the ink on the printer freezes and freezes, So you have to replace the new cartridge. Therefore, do not let your printer idle for too long or at least do regular printing and maintenance, even if it is only printing a piece of paper.

8.INCORRECT PAPER SETTINGS

In some series of laser printers, it cannot detect paper size automatically on the paper tray. So we have to set the paper size first according to the size of the paper to be printed. To make it easier to set the paper on the paper size and print quality that is commonly used, then save the settings so that they do not change when the printer or computer is turned off.

9.MISSING ERROR FOR DRIVER

Drivers are software that helps computers and printers communicate. Some printer drivers do not support the operation of certain systems, such as Mac OS. If an error message appears about the driver, you can contact where to buy the printer, download it from the internet, or contact the customer service of the printer manufacturer. Usually there are replacement or compatible drivers, although lacking some features, but allowing the printer to work.

10.THE INFUSION SYSTEM CRASHES

In inkjet printers that are now on the market, the average printer infusion system is installed that makes it easy to refill ink and can save on purchasing consumables. However, sometimes this problem arises because the infusion system or CISS used is of poor quality. Therefore, first make sure the quality, brand, and warranty service of the infusion system you use and the pleasure you buy at a trusted store such as Aslam Printer.

Berbagi :